Adhesives

We use over 70 years of experience in the research and development of adhesives and apply them in our production portfolio of adhesives under the Veropal brand. Veropal adhesives are primarily intended for professional use in various fields, but thanks to their user properties and high quality, do-it-yourselfers in the hobby sector also use them for their projects. We can adjust the technical parameters and properties of the adhesives to the customer's requirements.

Veropal Quick fast epoxy adhesive

Description: VEROPAL QUICK is a unique very fast two-component construction epoxy adhesive with good peel and shear strength.
Application: For structural bonding of a wide range of substrates. Professional and hobby use.
Substrates: In addition to metals, metal structures, wood, ceramics, it is suitable for bonding a number of polymeric composite materials, such as glass fiber reinforced polyesters, epoxies (SMC), etc.
Chemical base: 2-K epoxide
Viscosity before mixing: 5-15 Pa.s at 25 ° C
Viscosity after mixing: 10-20 Pa.s at 25 ° C
Workability time: 2-3 min
Gelation time: 5-7 min
Tg (° C) DSC: 50 - 60 ° C









 

Veropal Super hybrid construction epoxy adhesive

Description: VEROPAL SUPER is a unique hybrid epoxy two-component structural adhesive with high elongation of up to 55% and at the same time with excellent peel and shear strength.
Application: For structural bonding of a wide range of substrates.
Substrates: In addition to metals, metal structures, wood, ceramics, it is suitable for bonding a number of polymeric composite materials, such as glass fiber reinforced polyesters, epoxies (SMC), etc. Some difficult-to-bond thermoplastic materials can also be bonded with the Veropal Super adhesive system.
Chemical base: 2-K epoxide
Viscosity before mixing: 5-15 Pa.s at 25 ° C
Viscosity after mixing: 15-25 Pa.s at 25 ° C
Workability time: 15 - 20 min
Gelation time: 150 min
Tg (° C) DSC: 70 - 80 ° C





 

Veropal structural high-strength epoxy adhesive 14

Description: VEROPAL 14 is a two-component epoxy adhesive curing at room temperature. The system has the character of a thixotropic paste and after curing it shows a high degree of strength and high chemical resistance. The system is temperature resistant up to 120 ° C and is able to fill joints up to 5 mm thick.
Application: For structural bonding of a wide range of substrates, but especially composite structures, bonding of electronic components.
Substrates: Metals, metal components, reinforced composite materials (GRP, CFRP), ceramic materials, plastics (ABS, PA, PC ...)
Chemical base: 2-K epoxide
Viscosity before mixing: thixotropic
Viscosity after mixing: thixotropic
Workability time: 60 min
Tg (° C) DSC: 80 - 85 ° C





 

Low-viscosity epoxy adhesive VEROPAL 50HD / 45T for potting coil windings

Description: VEROPAL 50HD / 45T is a two-component epoxy system curable at normal temperatures. Its low viscosity allows easy flow and penetration into gaps and small spaces. The short gelling time allows the product to be handled after a short time from the start of watering. If further shortening of the curing time and achieving the final properties in a shorter time is required, it is possible to cure the system at elevated temperature.
Application: For potting windings of coils and transformers.
Substrates: Metals, metal parts, plastics
Chemical base: 2-K epoxide
Viscosity before mixing: component A = 2900 mPa.s at 25 ° C, component B = 1200 mPa.s at 25 ° C
Curing cycle: 24 hours at 25 ° C, 3 hours at 60 ° C
Pot life: 10 min at 25 ° C
Hardness after curing: 70-90 ShD
Temperature class after curing: 130

 

Thixotropic adhesive for gluing PVC and ABS Veropal JPVC

Description: VEROPAL JPVC is a thixotropic adhesive based on tetrahydrofuran suitable for bonding hard and soft PVC. It is characterized by fast and safe gluing, short curing time and minimal shrinkage.
Application: For gluing hard and soft PVC, but also other plastics such as ABS. Roofing, gluing pond foils, water-topo.
Substrates: plastics - PVC, ABS and more
Chemical base: tetrahydrofuran
Density: 0.95 - 1.0 g / cm 3 at 23 ° C
Workability time: ???
Glue consumption: 250-400 g / m2
Temperature class after curing: 130