Furniture and Art

We produce a wide range of interesting products for manufacturers of designer and standard furniture, for joiners, artists but also for do-it-yourself area. We offer clear VEROPAL casting epoxy resins ("crystal") including all accessories for the production of epoxy tables, oils, waxes and varnishes for surface treatments, structural adhesives and materials for repairing and renovations.


Clear Epoxy Resins

Veropal clear ("crystal") epoxy resins are excellent tools for creating interesting products and works such as epoxy tables (tables made of epoxy resin and wood), jewelry, epoxy art (geode, paintings) or creating decorative items such as epoxy lamps, epoxy clocks. Designated for professionals and also for people with imagination and only minimal skill. Whoever tries to work with these products, falls in love with them and wants to experiment further because there are no limits for creativity using these resins – almost everything can be cast. You can buy all mentioned resins in our e-shop EPOXIO.

Epoxy Resins with Improved UV Protection

VEROPAL UV PLUS 100
  • Slow version (cures up to 72-96 hours),
  • For applications of very large amounts of material at once – allows processing and cast at once up to 50 l up to 10 cm thick,
  • Excellent and fast bubble release even without the need for vacuuming,
  • Extremely low exotherm and shrinkage, which is compensated with a very long curing time (up to 96 hours) depending on quantity and layer thickness during application,
  • The final cast is hard and tough,
  • Mainly for bulky casts – tables, furniture, doors, headboards, but also smaller castings such as serving boards, clocks, lamps, etc.
VEROPAL UV PLUS 121
  • Fast version from VEROPAL UV PLUS 100 resin (cures in 24 hours within thickness 1 cm),
  • Replaces the original Veropal UV PLUS 120,
  • Maximal mixed volume at a time is 1 L and maximal thickness is 1 cm,
  • Excellent and fast bubble release even without the need for vacuuming,
  • The cast is very hard but more fragile compared to version 100,
  • Mainly for the production of jewelry and small castings, for thin layers and for repairs of cast tables (same refractive index as UV PLUS 100),
  • CAUTION: Higher relative humidity can form a shell on the surface. Could be solved by covering with plastic after casting to reduce influence of moisture.
VEROPAL UV PLUS 130
  • Medium speed version of VEROPAL UV PLUS 100 resin (cures within 48 hours),
  • For medium-volume applications – up to 10 l and thickness 5 cm,
  • Excellent and fast bubble release even without the need for vacuuming,
  • Low exotherm and shrinkage,
  • The cast is hard and tough.
  • Mainly for medium-volume castings tables, furniture, serving boards, clocks, lamps, jewelry, etc.

Epoxy Resins with High UV Protection

VEROPAL TRANSPARENT 200

VEROPAL TRANSPARENT 200 is a crystal clear two-component epoxy resin for the production of medium-sized castings and for casting layers up to 5 cm. It is highly UV resistant with low viscosity and self-leveling. It debubbles very well naturally, has very low shrinkage when cured and produces a high gloss. Furthermore, it has a medium processing time, the casting is clear and hard. It is beautifully fluid, odorless, with a simple mixing ratio. It can be easily colored, or partially fill with decorative items (stones, sequins, shards, etc.)

Usage: Production of smaller epoxy conference and side tables and medium-sized castings, epoxy lamps, clocks, serving boards, jewelry, advertising items. Also suitable for closing pores in wood, it soaks well into wood. Can be used for casting and gluing all types of materials (wood, concrete, glass, etc.) except plastics.

  •  Appearance after mixing of components A and B – water-clear liquid,
  • Dyeability - with suitable and compatible dyes and pigments,
  • Working temperature – ideally 19-23 °C. It is possible to work at lower temperatures, e.g. (10-15 °C) but hardening is slower.
  • Appearance after curing – clear, glossy.
VEROPAL TRANSPARENT 230

Usage: For medium-sized castings with epoxy resin, e.g. smaller tables but also smaller castings such as jewelry, bowls and other small objects.

  • UV stable (non-yellowing) epoxy casting resin,
  • Appearance after curing – water-clear, transparent,
  • Dyeable with dyes and pigments,
  • Mixing ratio 100 : 40,
  • Maximum pouring volume 10 liters up to a layer thickness of 4 cm,
  • Viscosity after mixing: 150-300 mPa.s,
  • Resulting hardness 77D,
  • Workability time <1.5 hr./0.5 kg
  • Curing time: 2 days; depending on the cast quantity and layer thickness,
  • Odorless.
VEROPAL TRANSPARENT 250

Usage: For small castings with epoxy resin, e.g. jewelry, bowls and other small objects, for thin surface layers of epoxy tables (hardness, higher heat resistance).

  • UV stable (non-yellowing) epoxy casting resin,
  • Appearance after curing – water-clear, transparent
  • Dyeable with dyes and pigments,
  • Mixing ratio 100 : 50,
  • Maximum pouring volume 1 liter up to a layer thickness of 2 cm,
  • Viscosity after mixing: 200-350 mPa.s,
  • Resulting hardness 75D,
  • Workability time <60 min/0.5 kg
  • Curing time: 1-2 days; depending on the cast quantity and layer thickness,
  • Odorless.

Epoxy Resins with Lower UV Protection and Lower Price

VEROPAL CLEARCAST 300

VEROPAL CLEARCAST 300 is a crystal clear two-component epoxy resin for production of medium-sized castings and for casting layers up to 5 cm. Certified for contact with food. It has moderate UV resistance, is self-leveling and low-viscosity. Good natural debubbling, high-gloss when cured, very low shrinkage. Medium processing time, the casting is clear and hard. It is odorless and fluid with a simple mixing ratio. It can be easily colored, or partially filled with decorative items (stones, sequins, shards, etc.)

Usage: Production of smaller epoxy conference and side tables and medium-sized castings, epoxy lamps, clocks, serving boards, jewelry and advertising items. Also suitable for closing pores in wood, it soaks well into wood. Can be used for casting and gluing of all types of materials (wood, concrete, glass, etc.) except plastics.

  • Appearance after mixing components A and B – water-clear liquid,
  • Dyeability – with suitable and compatible dyes and pigments,
  • Working temperature - ideally 19-23 °C. It is possible to work at lower temperatures, e.g. (10-15 °C) but hardening is slower,
  • Appearance after curing - clear, glossy.

Special Resins

Our special products are designated for epoxy paintings and geode art (VEROPAL ART 430), carpentry high-strength resin for straightening bent frames and boards (VEROPAL FIXWOOD), fast resin for casting thin layers and artistic creation (VEROPAL REBIDO 500), fast penetrating resin for sealing wood (VEROPAL PEN) snad resin for creating a mirror-like surface (VEROPAL TOP COAT). You can buy all mentioned resins in our e-shop EPOXIO.

VEROPAL FIXWOOD

VEROPAL FIXWOOD is a two-component, high-strength, fast-curing, slightly yellowish epoxy resin suitable for straightening bent or otherwise deformed wood (slats, planks, trunk slices...) and preserving substantial parts of the thickness of the wood. It hardens quickly, the cast is slightly yellowish and very hard. It is medium fluid, self-leveling with a simple mixing ratio and practically odorless. Furthermore, it can be easily colored. This system is compatible with casting epoxy resins VEROPAL.

Usage: Straightening bent or deformed wood, penetrating coating for sealing surfaces, especially for wood. Production of small, especially flat castings and jewelry. Preparation of repair sealants for wood. Can be used to bond all types of materials (wood, concrete, glass, etc.) except plastics. Repair compound for wood, concrete... Casting thin layers up to 3 mm.

  • Appearance after mixing component A and B – clear yellowish liquid,
  • Dyeability – suitable and compatible dyes and pigments,
  • Working temperature – ideally 19-23 °C. It is possible to work at lower temperatures, e.g. (10-15 °C) but hardening is slower.
  • Appearance after curing – clear yellowish, glossy.
VEROPAL PEN

VEROPAL PEN 10 is a two-component fast-curing, transparent epoxy resin used as a penetrating coating to seal the surface of wood so that air cannot escape from the wood into the cured resin when epoxies are poured. It is used for highly absorbent surfaces, porous surfaces or for the surface stabilization of slightly rotted wood, as well as on solid cohesive substrates. Production of repair putty for wood. It hardens quickly, the cast is clear and very hard. It is very fluid with a simple mixing ratio and practically odorless. Furthermore, it can be easily colored. This system is compatible with casting epoxy resins VEROPAL.

  • Mixing ratio by weight 100 : 35 (A : B),
  • Viscosity at 25 °C – 450-600 mPa.s,
  • Density at 23 °C – 1.07 g/cm3,
  • Appearance – clear, slightly yellowish liquid,
  • Dyeability – suitable and compatible dyes and pigments,
  • Maximum layer thickness – 1-3 mm,
  • Maximum pouring volume – 1 L,
  • Workability time – <10 min/0.5 kg,
  • Gelation time – depending on temperature, humidity, etc.; average 1 hour,
  • Curing time to dry touch – 3 hours,
  • Curing time – 5 hours,
  • Shrinkage – low,
  • Working temperature – 19-23 °C, possibly even lower, but curing time will be extended,
  • Hardness after hardening – 82 ShD,
  • Appearance after curing – glossy.
VEROPAL ART 430

VEROPAL ART 430 is a clear, thick, two-component, self-leveling and UV resistant epoxy resin suitable for artistic creation, production of epoxy paintings, geode art, casting of thin (especially top surface) layers around 1-5 mm. Certified for food contact. Creates a beautiful flat, hard surface with minimum shrinkage and high gloss. Thanks to its viscosity, it keeps the colors well separated, the colors do not blend into each other. It cures quickly, the layer without discoloration is clear and very hard. We recommend not to cast with it in thicknesses greater than 20 mm. It is fluid, with a simple mixing ratio, and practically odorless. It can be easily colored, or partially fill with decorative items (stones, sequins, shards, etc.)

Usage: Production of epoxy paintings and geode art. Top thin protective layer especially for wood (bar and table tops, etc.). Production of small castings and jewelry, advertising items, layered epoxy paintings. Can be used for casting and gluing all types of materials (wood, concrete, glass, etc.) except plastics.

  • Appearance after mixing components A and B – water-clear liquid,
  • Dyeability – with suitable and compatible dyes and pigments,
  • Working temperature - ideally 19-23 °C. It is possible to work at lower temperatures, e.g. (10-15 °C) but hardening is slower,
  • Appearance of the uncolored layer after curing – clear, glossy.
VEROPAL TOP COAT 600

VEROPAL TOPCOAT 600 is a clear two-component, quick-hardening, self-leveling and UV-resistant epoxy resin for casting thin (especially top surface) layers of around 1-5 mm, e.g. for tables (so-called Table Top). It debubbles very well naturally and creates a beautiful flat surface with minimal shrinkage and high gloss. It cures quickly, the cast is clear and very hard. Cannot be cast with in thicknesses greater than 10 mm (jewelry). It is very fluid, with a simple mixing ratio, and practically odorless. It can be easily colored, or partially fill with decorative items (stones, sequins, shards, etc.)

Usage: Top (surface treatment) thin protective layer especially for wood (bar and table tops, etc.). Production of small castings and jewelry, layered cast tables, advertising items, layered epoxy paintings. Can be used for casting and gluing all types of materials (wood, concrete, glass, etc.) except plastics.

  • Appearance after mixing components A and B – water-clear liquid,
  • Dyeability – with suitable and compatible dyes and pigments,
  • Working temperature - ideally 19-23 °C. It is possible to work at lower temperatures, e.g. (10-15 °C) but hardening is slower.
VEROPAL REBIDO 500

VEROPAL REBIDO 500 is a clear two-component, fast-curing and UV-resistant epoxy resin for casting thin repeated layers around 1-5 mm or as a thin epoxy surface layer (so-called Table TOP) for tables etc. It is self-leveling and naturally de-bubbles very well. Creates a beautiful flat surface with minimal shrinkage and a high gloss. It cures quickly, the cast is clear and very hard. It is not recommended for cast with it in thicknesses greater than 10 mm (jewellery). It is very fluid, with a simple mixing ratio, and practically odorless. Furthermore, it can be easily colored, or partially fill with decorative items (stones, sequins, shards, etc.)

Usage: Production of layered cast tables, clocks, cutting boards, layered epoxy paintings (after 1.5 hours the layer can already be painted), painted 3D casts (aquarium effect), small castings and jewelry and advertising items. Top (surface treatment) thin protective layer especially for wood (bar and table tops, etc.). Can be used for casting and gluing all types of materials (wood, concrete, glass, etc.) except plastics. 

  • Appearance after mixing components A and B – water-clear liquid,
  • Dyeability – with suitable and compatible dyes and pigments,
  • Working temperature – ideally 19-23 °C. It is possible to work at lower temperatures, e.g. (10-15 °C), but hardening is slower,
  • Appearance after curing – clear, glossy.

Products for Stabilization of Wood

The process of wood stabilization is a thorough impregnation of the wood with resin. The resin releases the tension inside the wood, limits further drying, deformation of the wood and greatly increases its resistance to moisture after hardening. We offer very effective resins for stabilizing wood and porous materials based on acrylic (VEROPAL WSB A) and epoxy (VEROPAL WSB E). VEROPAL WSB E-LV can be used for stabilization of large pieces of wood without using a vacuum. All mentioned materials can be tinted with series of concentrated dyes for stabilization, VEROPAL WSB PR. You can buy all mentioned resins in our e-shop EPOXIO.

VEROPAL WSB A

VEROPAL WSB A is a clear, low-viscosity, one-component acrylic resin suitable for stabilization of hard, compact, less porous materials and wood with micro cracks. It is liquid, practically odorless, easy to activate, has a long processing time and a high ability to saturate materials. It can be easily colored with dyes for stabilization, Veropal WSB PR. Furthermore, it produces a hard surface with minimal shrinkage and high gloss. Curing requires elevated temperatures of 85-95 °C in an oven or in hot water (must be carefully wrapped to prevent water penetration into the cured material) for a minimum of 2 hours. With proper storage, the activated resin can be used repeatedly, even after several months.

Usage: Stabilization of hard, less porous materials, compact wood with small microcracks.

  • Appearance after activation – water-clear liquid,
  • Dyeability – suitable and compatible dyes VEROPAL WSB PR,
  • Working temperature – ideally 19-23 °C. Temperature for resin curing is 85-95 °C for about 2 hours.
VEROPAL WSB E
  • Transparent, water-clear, low-viscosity, two-component epoxy resin developed specifically for wood stabilization,
  • For stabilizing more porous materials with larger cracks or holes,
  • Does not affect the original color of the stabilized material, however interesting colored drawings can be achieved by coloring with suitable compatible pigments,
  • Excellent running, absorbs well into the material,
  • Excellently sandable and polishable, does not clog sanding discs and can be polished to a high gloss,
  • Long workability time – approx. 120 min.
VEROPAL WSB E-LV

VEROPAL WSB E-LV is a clear, extra low-viscosity, two-component epoxy stabilizing resin for porous materials and wood with larger cracks or holes without the need for a vacuum chamber. It is certified for food contact. It is extremely liquid, runny, practically odorless. It debubbles very well naturally. It has a long workability time and a high ability to saturate materials. Furthermore, it can be easily colored with dyes for stabilization Veropal WSB PR. When cast (up to a layer of 5 cm) and cured, it creates a cast with a hard surface, minimal shrinkage and high gloss. It creates a very durable surface finish for exteriors as well. It cures at a normal temperature for about 1.5-2 days. Curing time is significantly shortened (2-3 hours) at an elevated temperature of about 75-80 °C in an oven.

Usage: Stabilization of porous and porous materials, soft, rotten, degraded wood and wood with large cracks. Casting of small to medium-sized castings with layers up to 5 cm (jewelry, clocks, cutting boards...). Also suitable for closing pores in wood, it soaks well into wood. As a durable surface treatment for wood, also for outdoor use.

  • Appearance after mixing components A and B – water-clear liquid,
  • Dyeability – with suitable and compatible dyes and pigments,
  • Working temperature - ideally 19-23 °C. It is possible to work at lower temperatures, e.g. (10-15 °C), but hardening is slower. Hardening time is significantly shortened (2-3 hours) at increased temperature, ca. 75-80 °C in an oven,
  • Appearance after curing – clear, glossy.
VEROPAL WSB PR

Usage: Production of luxury items, especially knives, jewelry, writing pens, phone cases, lighters, pipes, boxes, pool cues, various handles, weapon stocks and small furniture.

  • Colorants for WSB materials,
  • Concentrated for perfect coloration,
  • UV stable,
  • Bacsic colors: yellow, blue, red, green, orange, bordo, brown, black,
  • Compatible with resins WSB E, WSB E LV and WSB A,
  • Efficient in coloring of soft and hard wood.

Surface Treatment of Wood

We offer several varnishes for surface treatment of wood – LV CC 250 in a glossy version (it can also be matted on request), or coatings for protection against weathering (hydrophobic coatings, UV coatings). We are distributors of proven and tested oils and waxes (OSMO, RUBIO MONOCOAT, HOWARD). You can buy all mentioned materials in our e-shop EPOXIO.

CLEAR COAT LV CC 250

2K PUR acrylic clear coat with NANO technology.

  • Transparent top coat extremely resistant to scratching, with higher UV stability,
  • Certified for contact with food,
  • Overcoat for all types of metallic, pearl and effect base coats,
  • Application in sports equipment manufacturing, car refinishing and OEM production.
RUBIO MONOCOAT

Quality Rubio Monocoat oils are produced by the Belgian company Muylle-Facon. They focus on building chemistry, especially water-resistant materials, waterproof paints and sealants used in construction.

We sell the following materials:

VEROPAL D709

Veropal D709 is a special varnish for restoration work for protecting of metal, concrete, stone and wood against weather. It is also suitable for interiors. It can be used as a binder for silver and gold bronzes exposed to the weather, or for gluing and protecting of optical glass.

  • Description: Transparent solution of acrylic resin in organic solvents,
  • Refractive index: 1.45-1.60
  • Recommended thickness of dry layer: 30 µm (one layer crosswise),
  • Application technique: Brushing, rolling, spraying,
  • Yield: 8-14 m2/liter,
  • Drying: 1hr./30 µm.
HOWARD

Howard Products range of protective coatings includes oil and wax-based products for specific and multipurpose wood care applications. Their application is easy, safe and effective. Mixtures of carefully selected compatible oils and waxes beautifully highlight the drawing of the wooden base and create its effective and comprehensive protection. Howard Products renovation compounds restore and enhance surface protection.

We sell the following materials:

OSMO

Products of German firm with top quality and guaranteed lifetime 10 years.

We sell the following materials:


Adhesives for Furniture

Our product portfolio includes structural epoxy adhesives (VEROPAL QUICK, VEROPAL SUPER) usable in furniture industry. We also distribute instant cyanoacrylate adhesives of the American brand STARBOND and dispersion adhesives TITEBOND.

VEROPAL QUICK

Description: VEROPAL QUICK is a unique very fast two-component construction epoxy adhesive with good peel and shear strength.
Application: For structural bonding of a wide range of substrates. Professional and hobby use.
Substrates: Metal structures, wood, ceramics, polymeric composite materials, such as glass fiber reinforced polyesters, epoxies (SMC), etc.,

  • Chemical base: 2K epoxide,
  • Viscosity before mixing: 5-15 Pa.s at 25 °C,
  • Viscosity after mixing: 10-20 Pa.s at 25 °C,
  • Workability time: 2-3 min,
  • Gelation time: 5-7 min,
  • Tg via DSC (°C): 50-60 °C.
TITEBOND

The unique Titebond adhesives are the priority choice of many professional construction and woodworking experts, as well as do-it-yourselfers around the world for structural wood bonding. Excellent quality, technical design and perfect bonding results - these are their strengths. They are used mainly for high-strength joints of wood, laminates, DTD boards, leather, fabrics and porous materials. waterproof dispersion adhesives for versatile indoor and outdoor use.

Overview of products

VEROPAL SUPER

Description: VEROPAL SUPER is a unique hybrid epoxy two-component structural adhesive with high elongation of up to 55 % and at the same time with excellent peel and shear strength.
Application: For structural bonding of a wide range of substrates.
Substrates: Metal structures, wood, ceramics, polymeric composite materials, such as glass fiber reinforced polyesters, epoxies (SMC), etc. Some difficult-to-bond thermoplastic materials can also be bonded with the Veropal Super adhesive system.

  • Chemical base: 2K epoxide,
  • Viscosity before mixing: 5-15 Pa.s at 25 °C,
  • Viscosity after mixing: 15-25 Pa.s at 25 °C,
  • Workability time: 15-20 min,
  • Gelation time: 150 min,
  • Tg via DSC (°C): 70-80 °C.
STARBOND

American company Starbond has been producing and selling high-quality cyanoacrylate adhesives (CA/ uperGlue) for various industries, especially carpentry and woodworking since 1988. The production process, and especially the quality control, is subject to the strictest criteria, where each batch produced is extensively internally tested and must meet very strict quality standards. Starbond instant adhesives are used in epoxy casting mainly as a quick repair of wood or epoxy after processing the cured products, or as a filling for small and large cracks or knots in wood (according to the viscosity of the adhesive) or as a fast, hard and shiny surface treatment of small wooden objects. (e.g. wooden pens or vases).

Overview of products


Sealants and Repairing Materials for Furniture

We prepare a row of materials in this field.


Services for Furniture and Art

Consultation for selection of proper epoxy resin
  • Consultation on the possibilities and selection of suitable resins depending on the required properties, application or given project,

  • Customer development of epoxy resins – tailor-made resin formulation (on the basis of specifications) or adjustment of parameters to the necessary technological line + its testing,
  • Consultation of various casting procedures and techniques.
Testing of chemical, mechanical-physical and weather resistance
  • Testing of material resistance to weathering in accelerating chambers simulating weather changes in cycles,

  • Testing of UV resistance in simulated accelerating UV chambers,

  • Testing of the degradation of materials during exposure,

  • Determination of hardness, tensile strength, compressive strength, flexibility, toughness, etc.,

  • Testing of abrasion resistance, scratchability, roughness, etc.

Workshops "Step-by-step in epoxy casting"
  • Practical workshops for the public and corporate clients,
  • Different focusing:
    • Step-by-step epoxy resin casting guide,
    • Specialized workshops on casting techniques or individual products (jewelry, stabilized wood, clocks, epoxy painting...),
    • More detailed in certain parts of the casting process (e.g. varnishing) , surface treatments, grinding and polishing, etc.),
  • Contact person:

Jiří Kubín
Phone: +420 737 108 685
Email: jiri.kubin@synpo.cz

Consultation in sanding and choosing a surface finish
  • Consultation in choosing the right type of sanding, sander and abrasive and the correct procedure for sanding surfaces,
  • Consultation in polishing of surfaces,

  • Consultation in choosing the right surface finish and their correct application.

Analysis of defects
  • Analysis of defects caused by the casting of epoxy resin,
  • Focusing on material quality, technological conditions, compliance with the correct or recommended procedure, etc.