Lamination Epoxies

VEROPAL LAM 1000 is a clear two-component solvent-free epoxy resin with a hardener for very slow lamination of composite materials. It has a lower viscosity, it is self-levelling. Saturates lamination fabrics well. It has very low shrinkage when cured. Short processing time, the casting is hard. It is beautifully fluid, odorless, with a simple mixing ratio. It can be easily colored, or partially filled.

Usage: Fast lamination of composite materials – quick repairs. Production of composite parts. Suitable for manual lamination, winding lamination, RTM/RIM/SCRMP process and infusion.

Properties of uncured system:

• Mixing ratio 100 : 34 by weight,
• Viscosity at 25 °C – 200-350 mPa.s,
• Density at 23 °C – 1.07-1.1 g/cm3,
• Tintable yellowish liquid,
• Geltime at 25 °C in 100 g – 900-1100 min.,
• Gel time at 25 °C in 400 g – 700-800 min.,
• Workability at 25 °C in 100 g – <5 hrs./100 g,
• Workability at 25 °C in 400 g – <4 hrs./400 g.

Mechanical properties of the cured system:

• E modulus, bending – 3070 MPa,
• Bending strength – 109 MPa,
• Extension of bends – 4.4 %,
• E modulus, tension – 3350 MPa,
• Tensile strength – 64 MPa,
• Tensile extension – 3.4 %,
• Tg (DMA) – 75 °C,
• Tg (DSC) – 72 °C,
• Water absorption in 24 hours – 0.14 %,
• Water absorption after 7 days – 0.50 %.

Packaging: 1.34 kg, 6.7 kg and 13.4 kg.

VEROPAL LAM 400 is a clear two-component solvent-free epoxy resin with a hardener for slow lamination of composite materials. It has a lower viscosity, it is self-levelling. Saturates lamination fabrics well. It has very low shrinkage when cured. Short processing time, the casting is hard. It is beautifully fluid, odorless, with a simple mixing ratio. It can be easily colored, or partially filled.

Usage: Fast lamination of composite materials – quick repairs. Production of composite parts. Suitable for manual lamination, winding lamination, RTM/RIM/SCRMP process and infusion.

Properties of uncured system:

• Mixing ratio 100 : 28 by weight,
• Viscosity at 25 °C – 300-500 mPa.s,
• Density at 23 °C – 1.07-1.1 g/cm3,
• Tintable yellowish liquid,
• Geltime at 25 °C in 100 g – 350-400 min.,
• Gel time at 25 °C in 400 g – 160-200 min.,
• Workability at 25 °C in 100 g – <90 min./100 g,
• Workability at 25 °C in 400 g – <60 min./400 g.

Mechanical properties of the cured system:

• E modulus, bending – 3160 MPa,
• Bending strength – 134 MPa,
• Bending extension – 5.3 %,
• E modulus, tension – 3530 MPa,
• Tensile strength – 70 MPa,
• Tensile extension – 2.6 %,
• Tg (DMA) – 94 °C,
• Tg (DSC) – 106 °C,
• Water absorption in 24 hours – 0.114 %,
• Water absorption after 7 days – 0.370 %.

Packaging: 1.28 kg, 6.4 kg and 12.8 kg.

VEROPAL LAM 200 is a clear two-component solvent-free epoxy resin with a hardener for medium-speed lamination of composite materials. It has a lower viscosity, it is self-levelling. Saturates lamination fabrics well. It has very low shrinkage when cured. Short processing time, the casting is hard. It is beautifully fluid, odorless, with a simple mixing ratio. It can be easily colored, or partially filled.

Usage: Fast lamination of composite materials – quick repairs. Production of composite parts. Suitable for manual lamination, winding lamination, RTM/RIM/SCRMP process and infusion.

Properties of uncured system:

• Mixing ratio 100 : 28 by weight,
• Viscosity at 25 °C – 450-650 mPa.s,
• Density at 23 °C – 1.07-1.1 g/cm3,
• Tintable yellowish liquid,
• Geltime at 25 °C in 100 g – 200-230 min.,
• Gel time at 25 °C in 400 g – 150-170 min.,
• Workability at 25 °C in 100 g – <60 min./100 g,
• Workability at 25 °C in 400 g – <40 min./400 g,

Mechanical properties of the cured system:

• E modulus, bending – 3250 MPa,
• Bending strength – 135 MPa,
• Bending extension – 5.4 %,
• E modulus, tension – 3520 MPa,
• Tensile strength – 68 MPa,
• Tensile extension – 2.35 %,
• Tg (DMA) – 95 °C,
• Tg (DSC) – 118 °C,
• Water absorption in 24 hours – 0.10 %,
• Water absorption after 7 days – 0.33 %.

Packaging: 1.28 kg, 6.4 kg and 12.8 kg.

VEROPAL LAM 80 is a clear two-component solvent-free epoxy resin with a hardener for fast lamination of composite materials. It has a lower viscosity, it is self-levelling. Saturates lamination fabrics well. It has very low shrinkage when cured. Short processing time, the casting is hard. It is beautifully fluid, odorless, with a simple mixing ratio. It can be easily colored, or partially filled.

Usage: Fast lamination of composite materials – quick repairs. Production of composite parts. Suitable for manual lamination, winding lamination, RTM/RIM/SCRMP process and infusion.

Properties of uncured system:

• Mixing ratio 100 : 28 by weight,
• Viscosity at 25 °C – 450-650 mPa.s,
• Density at 23 °C – 1.07-1.1 g/cm3,
• Tintable yellowish liquid,
• Geltime at 25 °C in 100 g – 70-90 min.,
• Gel time at 25 °C in 400 g – 50-60 min.,
• Workability at 25 °C in 100 g – <30 min./100 g,
• Workability at 25 °C in 400 g – <20 min/400 g.

Mechanical properties of the cured system:

• Bending modulus – 3300 MPa,
• Bending strength – 139 MPa,
• Bending extension – 5.7 %,
• E modulus, tension – 3600 MPa,
• Tensile strength – 74 MPa,
• Tensile extension – 2.7 %,
• Tg (DMA) – 100 °C,
• Tg (DSC) – 116 °C,
• Water absorption in 24 hours – 0.11 %,
• Water absorption after 7 days – 0.36 %.

Packaging: 1.28 kg, 6.4 kg and 12.8 kg.

VEROPAL LAM 30 is a clear two-component solvent-free epoxy resin with a hardener for fast lamination of composite materials. It has a lower viscosity, it is self-levelling. Saturates lamination fabrics well. It has very low shrinkage when cured. Short processing time, the casting is hard. It is beautifully fluid, odorless, with a simple mixing ratio. It can be easily colored, or partially filled.

Usage: Fast lamination of composite materials – quick repairs. Production of composite parts. Suitable for manual lamination, winding lamination, RTM/RIM/SCRMP process and infusion.

Properties of uncured system:

• Mixing ratio 100 : 29 by weight,
• Viscosity at 25 °C – 450-650 mPa.s,
• Density at 23 °C – 1.07-1.1 g/cm3,
• Tintable yellowish liquid,
• Geltime at 25 °C in 100 g – 25-35 min.,
• Gel time at 25 °C in 400 g – 20-30 min.,
• Workability at 25 °C in 100 g – <15 min./100 g,
• Workability at 25 °C in 400 g – <10 min/400 g.

Mechanical properties of the cured system:

• E modulus, bending – 200 MPa,
• Bending strength – 140 MPa,
• Bending extension – 5.5 %,
• E modulus, tension – 3510 MPa,
• Tensile strength – 76 MPa,
• Tensile extension – 4.6 %,
• Tg (DMA) – 99 °C,
• Tg (DSC) – 105 °C,
• Water absorption in 24 hours – 0.24 %,
• Water absorption after 7 days – 0.72 %.

Packaging: 1.29 kg, 6.45 kg and 12.9 kg.

VEROPAL LAM AERO 45 is a clear two-component solvent-free epoxy resin with hardener for fast lamination of composite materials. Developed for the aerospace, shipbuilding and sports equipment industries. It has a lower viscosity, it is self-levelling. Saturates lamination fabrics well. It has very low shrinkage when cured. Short processing time, the casting is hard. It can be easily colored, or partially filled. It is beautifully liquid, odorless, with a simple mixing ratio. 

Usage: Fast lamination of composite materials – fast repairs. Manufacturing of composite parts in aircraft modelling, shipbuilding and sports equipment. Suitable for manual lamination, winding lamination, RTM/RIM/SCRMP process and infusion.

Properties of uncured system:

• Mixing ratio 100 : 32 by weight,
• Viscosity at 25 °C – 250-450 mPa.s,
• Density at 23 °C – 1.07-1.1 g/cm3,
• Tintable yellowish liquid,
• Geltime at 25 °C in 50 g – 40-60 min.,
• Geltime at 25 °C in 100 g – 35-55 min.,
• Workability at 25 °C in 100 g – <30 min./50 g,
• Workability at 25 °C in 400 g – <20 min./100 g.

Mechanical properties of the cured system:

• Bending modulus – 3330-3450 MPa,
• Bending strength – 130-145 MPa,
• Bending extension – 6-8 %,
• E modulus, tension – 3000-3400 MPa,
• Tensile strength – 60-40 MPa,
• Tensile extension – 3-6 %,
• Tg (DMA) – 95-105 °C
• Tg (DSC) – 105-120 °C
• Water absorption in 24 hours – 0.11%
• Water absorption after 7 days – 0.41%

Packaging: 1.32 kg, 6.6 kg and 13.2 kg.